Security Camera World SCW-7709 Manual de instrucciones descargar pdf (Pagina 49)

- 49 -

 E-mail – to send the event e-mail to remote station or not. The e-mail will be

sent to the predefined receivers when the event is triggered. Press ENTER or

+/- to check/uncheck this item. The default setting is “” - unchecked.

6.6.1 HDD Format/Clear

In HDD Setup display, press MODE to call up HDD Format/Clear screen as shown.

Each of the HDDs must be formatted before it can be used to record video/audio.

The HDD Format/Clear screen allows the administrator to format and/or clear each

HDD, and set the size for Alarm Record partition and Normal Record partition for

each HDD. Please note that the HDD IDs for the internal HDDs in the DVR

start from ID 1, lower for IDE and higher for SATA, and the HDDs in the

farthest Hard Disk Box have the lowest HDD ID next to internal HDDs.

The general operations are as below:

 ▲▼◄►

Press these buttons to select the items. The display will scroll left/right if the

selected item is not shown on the screen.

 MODE => Format

Press this button to format the selected HDD. A confirmation dialog will be

shown on the screen, press ENTER to confirm, or ESC to cancel. Please note

that it would take about 40 seconds to format a brand new HDD.

Note: If the HDD has not been formatted yet, it will be formatted and partitioned

with default record size, 30% for Alarm record and 70% for Normal record.

If it has been formatted before, it will be formatted according to the Alarm

REC Size (%) and Normal REC Size (%) displayed on the screen, but the

previously recorded contents within the new size won’t be cleared and will

be accessible.

SCW-7709 & SCW-7716 Users Manual

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 88 89

Sin comentarios

Security Camera World SCW-7709 Manual de instrucciones Pagina 49