Security Camera World SCW-7709 Manual de instrucciones Pagina 53

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 89
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 52
- 53 -
ESC
Press this button to escape from this screen, and return to Setup Menu display. If
the Save dialog is shown, press ENTER to exit and save, ESC to exit without
saving. Please note that if the selected language is changed, the user will be
asked to reboot the system for the newly selected language to take effect.
Following is a brief description for each item and its specific operations:
Time Zone – press +/- buttons to select the time zone for the system. Please
refer to Appendix C
for the time zone table.
Daylight Saving Time – press ENTER or +/- to check/uncheck this item. The
default value is set by selecting a different time zone, but the user may
check/uncheck this item if the default setting is checked.
System Time
Synchronization – time synchronized with TSP Server or not. Press
ENTER or +/- to check/uncheck this item. The default setting is “” -
unchecked.
TSP Server – TSP (Time Synchronization Protocol) server name if Time
Synchronization is enabled. The system will try to do time synchronization
with the specified TSP server at the system preset interval. Please follow the
Text Input method described in Section 4.1
to modify this item.
Date – system date. Press +/- buttons to modify each of these items.
Time system time. Press +/- buttons to modify each of these items.
Display Format – format used for the system time displayed on the lower-left
corner of the main screen. Press +/- buttons to select the desired format.
Language – press +/- buttons to select the language for the system. The
languages supported include: Simplified Chinese, Russian, English ,
ITALIAN, etc.
Protection Key – the protection key for the remote access of the system. Please
follow the Text Input method described in Section 4.1
to modify these items.
Note: This protection key will be used for authentication when any remote station
wants to connect with the system from Ethernet interface, either LAN or
internet. So, the same protection key must be entered to install the remote
software if it is to be used to access the system.
SCW-7709 & SCW-7716 Users Manual
SCW-7709 & SCW-7716 Users Manual
Vista de pagina 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 88 89

Comentarios a estos manuales

Sin comentarios