
- 70 -
4. The domain name or IP address of the digital video/audio recorder has been set as
trusted web site in your PC, and the (https:) server verification for trusted web
site is unchecked. If not, please go to Tools->Options->Security in your I.E. to
do the settings. For I.E. 7, please set the Security level for this zone to Low.
5. The ActiveX control in your PC is not disabled. If you are not sure, please go to
Tools->Options->Security->Custom in your I.E. to enable ActiveX control.
6. Port 67 (control port) or port 68 (data port) is not blocked out by your router or ISP
(Internet Service Provider).
7. If the PC has used I.E. to access earlier software version of DVR, please go to
Tools->Options->General in your I.E. to delete “Temporary Internet files” and
all offline contents.
8. To have better look-&-feel for your PC, please go to Start->Setup->Control, and
select Display->Visual Style->Windows XP Style.
9. Please go to Start->Setup->Control, select Display->Settings, and set the Screen
Resolution to at least 1024x768 and Color to 32-bit.
Logon
After the above-mentioned items have been done correctly, restart your web browser
and enter the domain name or IP address (EX. http://192.168.1.100
if HTTP port is 80,
or http://192.168.1.100:800
if HTTP port is 800) of the digital video/audio recorder in
the Location/Address field of the web browser. The plug-in software in the system
will be downloaded and run automatically in the web browser. Please note that up
to 8 users can logon this DVR simultaneously.
Remote Display and Operations
After the plug-in software is downloaded and run in the web browser, you will be
asked (1) to install redistributable software, and (2) for ActiveX control to interact
with your PC. Please select Yes, and the remote login display will be shown.
Please note that the PC user must have system administrator password for the
PC; otherwise, the process will fail, and an error dialog will be shown. For some
PCs, it may be necessary to click in the window with the message in red color, but
outside the Login Dialog before the next step. Please enter the correct login name
and password for the digital video/audio recorder to login the system. (For software
V3.30 or above, please enter the correct control port & data port if they have been
changed.) And the main remote display will be shown as below.
SCW-7709 & SCW-7716 Users Manual
SCW-7709 & SCW-7716 Users Manual
Comentarios a estos manuales